You can choose where and how you want to install the door.Whether thicker exterior walls, wooden entrance doors or even insulating glazing:The petWALK door adapts perfectly to your situation.

Easy installation!

Actually, all you need to install a petWALK door is a hole of the appropriate size and a power socket within a radius of approx. 1 m without an extension cable and approx. 4 m with an extension cable.

Push one part of the device into the prepared opening from the outside and the other from the inside. Screw both parts together and seal them well. Plug in the power supply. Done!

The Proper Installation Location

You are free to choose the installation location, material, and position of the pet door. Select a sheltered and quiet spot (not facing the sun or prevailing weather) that is easily accessible for your pets and where you don't constantly walk past.

Medium or Large, left or right - As You Prefer!

With petWALK doors, you can not only choose between two sizes but also the door opening direction, meaning which way the door leaf opens.

You can select a pet door with a left or right hinge to suit your personal living situation.

Through thick or thin – we have a solution for everything!

petWALK pet doors are designed for the easiest possible installation into various building structures.

"Enclosing" Installation: This installation method is the simplest and quickest way to install the petWALK pet door into a building component. It is used when the door is retrofitted into building elements with smooth surfaces (laminated glass; doors with flat, smooth surfaces). You only need to create an opening of the appropriate size in the building component, which can then be enclosed by the pet door. The pet door is firmly pressed against the glass or door on both sides using the supplied screws, thus securing itself to the building component. A continuous seal on both frames ensures an airtight and watertight connection. For thin building components spacers (available as an accessory) is needed to clamp the door. Similarly, retrofitting into masonry can also be performed. Here, the petWALK pet door can be clamped either directly to the outer wall or between the inner wall and a previously installed subframe. The space in the wall between the outer and inner frames is sealed with a tunnel.

On the left side, you will find detailed information about the different installation methods.